Download Car Batteries APK latest version Free for Android
| Version | 1.0 |
| Update | 7 years ago |
| Size | |
| Developer | NABIOM SOFT |
| Category | Apps, Auto & Vehicles |
| Package Name | com.carsappsnabiom.carbatteries |
| OS | 4.0.3 and up |
Car Batteries APPLICATION description
Car Batteries is the best application if you want to know everything about Car Batteries.
An automotive battery is a rechargeable battery that supplies electric energy to an automobile. Traditionally, this is called SLI, for starting, lighting, ignition, and its main purpose is to start the engine. Once the engine is running, the power is supplied by the alternator.
Typically, starting discharges less than three per cent of the battery capacity. SLI batteries are designed to release a high burst of current, measured in amperes, and then be quickly recharged. They are not designed for deep discharge, and a full discharge can reduce the battery's lifespan.
As the SLI battery supplies the extra power needed when the vehicle's electrical requirements exceed the supply of the charging system. It is also a stabilizer, potentially-damaging voltage spikes.
While the engine is running, most of the power is supplied by the alternator, which includes a voltage regulator to keep the output between 13.5 and 14.5 V.
Modern SLI batteries are lead-acid type and provide 12.6 volts of direct current, nominally 12 V. The battery is actually six cells connected serially.
Battery powered by a high-voltage electric vehicle battery, but they usually have an automotive battery as well, so that it can be equipped with standard automotive accessories which are designed to run on 12 V.
Heat is the primary cause of battery failure as it accelerates corrosion inside the battery.
A battery with a battery charger, a battery charger, a battery charger, a battery charger, a battery charger, and a battery charger. load.
Corrosion at the battery terminals can prevent a car from starting due to electrical resistance, which can be prevented by the proper application of dielectric grease.
Sulfation occurs when the electrodes become coated with a hard layer of lead sulfate which weakens the battery. This is a battery that is not fully charged and remains discharged. Sulfated batteries should be slowly to prevent damage.
SLI batteries are not designed for deep discharge, and their life is reduced when subjected to this.
Car batteries using lead-antimony plates require regular topping-up with pure water to replace water lost due to electrolysis and evaporation. By changing the alloying element to calcium, more recent designs have reduced the rate of water loss. Modern car batteries have reduced maintenance requirements, and may not provide caps for addition of water to the cells. Such batteries include extra electrolyte above the plates to allow for losses during the battery life.
Some battery manufacturers include a built-in hydrometer to show the state of charge of the battery.
The primary wear-out mechanism is the shedding of active material from the battery plates, which accumulates at the bottom of the cells.
Battery recycling of automotive batteries for the manufacture of new batteries, diverts of lead from landfills, and prevents risk of improper disposal. (ULAB), which is classified as hazardous waste under the Basel Convention.
The 12-volt car battery is the most recycled product in the world, according to the United States Environmental Protection Agency. In the U.S. alone, about 100 million auto batteries have been replaced, and 99 percent of them are turned in for recycling.
Download Car Batteries App now for FREE !!
An automotive battery is a rechargeable battery that supplies electric energy to an automobile. Traditionally, this is called SLI, for starting, lighting, ignition, and its main purpose is to start the engine. Once the engine is running, the power is supplied by the alternator.
Typically, starting discharges less than three per cent of the battery capacity. SLI batteries are designed to release a high burst of current, measured in amperes, and then be quickly recharged. They are not designed for deep discharge, and a full discharge can reduce the battery's lifespan.
As the SLI battery supplies the extra power needed when the vehicle's electrical requirements exceed the supply of the charging system. It is also a stabilizer, potentially-damaging voltage spikes.
While the engine is running, most of the power is supplied by the alternator, which includes a voltage regulator to keep the output between 13.5 and 14.5 V.
Modern SLI batteries are lead-acid type and provide 12.6 volts of direct current, nominally 12 V. The battery is actually six cells connected serially.
Battery powered by a high-voltage electric vehicle battery, but they usually have an automotive battery as well, so that it can be equipped with standard automotive accessories which are designed to run on 12 V.
Heat is the primary cause of battery failure as it accelerates corrosion inside the battery.
A battery with a battery charger, a battery charger, a battery charger, a battery charger, a battery charger, and a battery charger. load.
Corrosion at the battery terminals can prevent a car from starting due to electrical resistance, which can be prevented by the proper application of dielectric grease.
Sulfation occurs when the electrodes become coated with a hard layer of lead sulfate which weakens the battery. This is a battery that is not fully charged and remains discharged. Sulfated batteries should be slowly to prevent damage.
SLI batteries are not designed for deep discharge, and their life is reduced when subjected to this.
Car batteries using lead-antimony plates require regular topping-up with pure water to replace water lost due to electrolysis and evaporation. By changing the alloying element to calcium, more recent designs have reduced the rate of water loss. Modern car batteries have reduced maintenance requirements, and may not provide caps for addition of water to the cells. Such batteries include extra electrolyte above the plates to allow for losses during the battery life.
Some battery manufacturers include a built-in hydrometer to show the state of charge of the battery.
The primary wear-out mechanism is the shedding of active material from the battery plates, which accumulates at the bottom of the cells.
Battery recycling of automotive batteries for the manufacture of new batteries, diverts of lead from landfills, and prevents risk of improper disposal. (ULAB), which is classified as hazardous waste under the Basel Convention.
The 12-volt car battery is the most recycled product in the world, according to the United States Environmental Protection Agency. In the U.S. alone, about 100 million auto batteries have been replaced, and 99 percent of them are turned in for recycling.
Download Car Batteries App now for FREE !!
↓ Read more
